With strict quality control, best performance, durable and low breakdown rate.
Adjustable straightening speed, the highest speed up to 55m/min.
Cutting effect is precise and flat, the accuracy even could to be 0.
Can meets international standard;
Hydraulic system brings the high accuracy and no oil leakage.
Rebar straightening and cutting machine is widely used in the building, constructing and rebar manufacture process. It is mainly used to straighten and cut the coiled rods. This machine has good quality, high capacity, adjustable straightening speed and lower cutting length tolerance. It can save the time and labor force greatly.
| Model | GT2-5 | GT4-10 | GT4-14A | GT4-14B | GT4-14C | GT4-14D |
| Power | 4KW | 3KW+3KW | 7.5KW | 7.5KW | 11KW | 15KW+5.5KW |
| Voltage | 380V / 50HZ / Single Phase | |||||
| Motor speed | 1440r/min | 1440r/min | 1440r/min | 1440r/min | 1440r/min | 1440r/min |
| Round bar | 2.5-5.8mm | 4-10mm | 4-14mm | 4-14mm | 4-14mm | 4-14mm |
| Rebar | 2-5mm | 4-8mm | 4-12mm | 4-12mm | 4-12mm | 4-12mm |
| Straightening speed | 30m/min | 35-50m/min | 35-50m/min | 35-50m/min | 55m/min | 75-100m/min |
| Cut length | 50-99m | 0.3-99m | 0.3-99m | 0.3-99m | 0.3-99m | 0.3-99m |
| Cutting error | ±5mm | ±5mm | ±5mm | ±5mm | ±5mm | ±3mm |
| Weight | 300KG | 280KG | 400KG | 570KG | 680KG | 880KG |
| Overall dimension | 110*75*80cm | 145X58X85cm | 185*80*120cm | 210*85*150cm | 240*90*150cm | 270*90*150cm |
Scrap bar straightening machine As a kind of straightening machine, the scrap bar straightening machines are able to straighten crooked steel bar, waste reinforcing steel, steel stub bar, etc.
Engine Model: Gasoline HONDA GX160 or B&S 163
Power: 4.0KW / 5.5HP
Working Circle Diameter: 980mm
Weight: 130KG
Cutting Diameter: Rebar 4-25mm
Motor Power: 1600/1700W
Motor Speed: 3.5-4.5S
Weight: 32KG
Tube bending is a process used to reshape tubing or piping into a certain shape or design. This process works on metal, alloy, aluminum, titanium, and steel.
Engine Model: Gasoline Honda or Diesel engines
Power: 9.6KW / 13HP
Blade Diameter: 300-500mm
Cutting Depth: 50-180mm
If you have any inquires about the construction machinery & road machinery, please donnot hesitate to contact us. We will reply you ASAP.